Product ID:1095, THREADWELL CUTTING TOOLS
MSDS Date:11/01/1985
FSC:9510
NIIN:00N031599
MSDS Number: BPJXM

BESLY PRODUCTS CORPORATION

100 DEARBORN AVE
SOUTH BELOIT, IL 61080
US

Emergency Phone: 815-389-2231

Info Phone: 815-389-2231

Cage: 92061

BESLY PRODUCTS CORPORATION

SOUTH BELOIT, IL 61080 US

Telephone: 815-389-2231

Cage: 92061

HIGH TOXICITY VIA THE INTRAPERITONEAL

RTECS: 9999999ZZ

AVOID RESULTING EXPOSURES WHEN HANDLING,

RTECS: 9999999ZZ

IRON (III) OXIDE; (IRON)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: BALANCE

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0.4%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

CARBON BLACK; (CARBON)

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 0.95%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

SILICON; (SILICON - MFR CAS# 7440-21-2)

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0.25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

SULFUR; (SULPHUR) (SARA III)

CAS: 7704-34-9

RTECS: WS4250000

Fraction By Weight: <0.05%

PHOSPHORUS (WHITE); (PHOSPHORUS)

CAS: 7723-14-0

RTECS: TH3500000

Fraction By Weight: <0.04%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROD IN THE FORM IT IS SOLD DOES NOT
CONSTITUTE PHYSICAL/HLTH HAZ. SUBSEQUENT OPERATIONS SUCH AS
ABRADING/ MELTING/WELDING/CUTTING/PROCESSING IN ANY OTHER FASHION
MAY PRDCE POTNTLY HAZ DUST/FUME WHICH CAN BE
INHALED/SWALLOWED/COME IN CONT W/SKIN OR EYES. DETERM ACTUAL EXPOS
BY INDUS HYGIENE MONITORING. (EFT OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: POSS SIGNS/SYMP OF EXPOS TO DUST/
WELDING FUME/GASES: ACUTE: METALLIC TASTE; NAUS/TIGHTNESS OF CHEST;
FEVER; IRRIT OF EYES/NOSE/THROAT/SKIN; LOSS OF CONSCIOUSNESS/DEATH
DUE TO WELDING GASES OR LACK OF O2. CHRONIC: NO ADVERSE EFTSFROM
PRODS IN THEIR SOLID FORM. ADVERSE EFTS MAY OR MAY NOT RSLT
FROM(SUPP DATA
Medical Cond Aggravated by Exposure:AGGRAVATION OF PRE-EXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid:INHAL: MOVE TO FRESH AIR. IF CONDITION CONTINUES, CONSULT MD.
EYES: FLUSH WELL W/RUNNING WATER FOR AT LEAST 15 MINUTES TO REMOVE
PARTICULATE. GET MED ATTN. SKIN: BRUSH OFF EXCESS DUST. WASH AREA
WELL WITH SOAP & WATER. INGEST: SEEK MEDICALHELP IF LARGE
QUANTITIES OF MATERIAL HAVE BEEN INGESTED.

Flash Point:NONE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:MATL IS POTENTIALLY CONTAMD W/COATINGS SUCH AS OILS
FOR PRESERVATIVES & OTHER CONTAMINANTS. IF MATL IS CONTAMD, SPECIAL
PREC (SUCH AS PROCESS CONTROL & PERSONAL PROT EQUIP APPROP TO
NATURE OF SUSPECTE D CONTAMINANTS SHLD BE TAKEN TO (ING 8)

Respiratory Protection:IF FUMES, MISTING OR DUST CONDITION OCCURS AND
TLV IS EXCEEDED, PROVIDE NIOSH/MSHA APPROVED RESPIRATORS.
Ventilation:GENERAL - RECOMMENDED (TO KEEP AIRBORNE CONCENTRATION OF
DUST AND FUMES BELOW ACGIH TLV'S). LOCAL - AS REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED.
Work Hygienic Practices:USE GOOD HOUSEKEEPING PRACTICES TO PREVENT
ACCUMULATIONS OF DUSTS AND TO KEEP AIRBORNE CONCENTRATIONS AT A
MINIMUM.
Supplemental Safety and Health
EFT OF OVEREXP: LONG-TERM EXPOS TO DUST/ FUME/ GASES/ETC BY WAY OF
SUBSEQUENT OPERATIONS ON THE PROD. CARBON: NUISANCE DUST IS NOT
GENERALLY REGARDED AS AN INDUS POISON; HOWEVER, NO DUST WHEN
INHALED IN SUFFICIENT AMTS IS COMPLETELY INERT.IRON: DUST CAN
CAUSE CONJUNCT. OXIDE FUME CAN CAUSE CHRONIC BRONCHITIS. (ING 7)

HCC:N1
Boiling Pt:B.P. Text:5000F,2760C
Melt/Freeze Pt:M.P/F.P Text:2500F,1371C
Spec Gravity:7.8-8.2(H2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:VARIOUS SHAPES, SOLID, ODORLESS METAL

Stability Indicator/Materials to Avoid:YES
REACTS WITH STRONG ACIDS TO GENERATE HYDROGEN GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METALLIC OXIDES.

Waste Disposal Methods:SOLIDS - SALE AS SCRAP FOR REUSE. DUST, ETC. -
FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS REGARDING DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.